![]() ![]() When the Erase completes the iSCSI drive will be mounted on the Desktop and will show in Finder. Locate the iSCSI Storage Media in the list on the left and select it.Ĭlick the Erase button on the top right, and below choose the Format and enter a Name, then Click Erase. On the Menu Bar at the top click Go, Utilities and open the Disk Utility. ![]() Use the Disk Utility to format the iSCSI driveĪ yellow alert will open prompting, “The disk you inserted was not readable by this computer.” The State light will show green indicating connected. Under Connections click the Connect Button. The IP Address has been added to the globalSAN application.Ĭlick the Triangle next to the IP. Type in the NAS IP Address and click Add.Ĭlick the iSCSI Options button and check-mark “Always send “Session Type” when connecting then click Done. The globalSAN iSCSI Initiator trial is available here including options for support.Ĭlick the + plus sign and choose the Portal / Group. Note: A third-party iSCSI Initiator was used on the Mac to connect to Seagate NAS iSCSI Target. Mount a Seagate NAS iSCSI Target on a Mac The Export option exports the iSCSI Target as a backup. Option allows for changing the Name, IQN, Description, enable or disable Multiple sessions, CHAP, and adding or removing Authorized IQN’s. An Edit dropdown menu is available to Delete the iSCSI Target, Edit Options, or Export. When the iSCSI Target has been created, it will show as disconnected. Click Finish to confirm the selections.If an IQN from a Windows Server or Workstation is assigned as an Authorized IQN, only that system will be able to connect to the iSCSI Target. The IQN can be found in the iSCSI Initiator in the Windows OS that will be using the iSCSI target. The IQN Identifies a particular iSCSI element, regardless of its physical location. To avoid data corruption or loss, make sure you operating in a cluster environment.ĬHAP (Challenge Handshake Authentication Protocol) - Allows one-way and Mutual CHAP to authenticate with the Microsoft iSCSI Initiator and the target.Īuthorized IQN - IQN stands for (iSCSI qualified name). Multiple Sessions - Is for multiple connections to a single iSCSI Target. Validate the data segment of the protocol data unit. It ensures the validity of the header portion of the protocol data unit.ĭata Digests - Increases data integrity. Header Digest - Increases data integrity. ISCSI target capacity is limited to 8TB total or to the available free space of the NAS less than 8TB.Ī note on iSCSI "Advanced parameters (optional)": Set the capacity and Advanced parameters (optional) and click Next.Click the “Add iSCSI” button under Associated iSCSI targets.In the list of choices on the left click Volume located under Storage.On the Home page click the Device Manager icon.Log in to the NAS Welcome page as admin or a user with administrative privileges.When using Safari to access the NAS Manager page type in the address field: A LUN can be only mapped to a single Target.Ī LUN file is always attached to a target : You create a target and consequently a LUN file is created.The ISCSI protocol is available on NAS OS 4.0 products, but with some restricted functionalities: Go to the Network section of the NAS Administrative page to setup a Static IP Address. If it has been decided to connect by IP address, it is suggested the NAS be setup with a Static / Manual IP Address in advance. It enables computers to access iSCSI Targets over a network the same way they would access a drive that is directly connected to a computer.Īn iSCSI Initiator can connect to an iSCSI target by the Seagate NAS Host Name or by IP Address. iSCSI is an extension of the standard SCSI storage interface that allows SCSI commands to be sent over an IP based network. ISCSI stands for "Internet Small Computer Systems Interface". ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |